About This Item
Mazaki Kiritsuke Wa Gyuto 240mm White II Steel blade Sanmai-Uchi Knife With Octagonal Shaped Ho handle forged by Mr. Naoki Mazaki
The blacksmith , Mr. Naoki Mazaki started on the blacksmith job since 2011, and in 2017, he has established his own business at his own factory after he had worked at Yoshikane, Sanjyo.
This blade is thick on the spine (taper spine) that works for cutting or split into the ingredient like an ax, and the tip side becomes thinner on the spine, and the Kiritsuke tip style makes the tip skinnier to easy to slice in the ingredient. It makes easier to come off the ingredient from the blade without stuck on the blade.
Hagane: Hitachi white II steel (C; 1.0-1.1%, Si.; 0.10-0.20%, Mn; 0.20-0.30, P; less than 0.025, S; less than 0.004)
Blade Length; 9 3/4 inch (245mm) Handle Length; 5 3/4 inch (143mm) Total Length; 15 3/4 inch (402mm) Knife weight: 9.4oz. Spine width nearby the heel is 5mm (1/4 inch) wide. Spine width near by the kiritsuke corner is 1.5mm (l/8inch) The width from the heel to the spine: 53mm (2 1/8inch) HANDLE; octagonal shaped Ho (Japanese magnolia) with Water Buffalo horn bolster BLADE; Hitachi white II steel (high carbon steel ) with Sanmai Uchi (soft iron cladding)